Product & Application » PM-800 – Bonding Agent
PM-800 – Bonding Agent
USAGE
Bonding Agent PM-800 is a Copolymer Acrylic Styrene to be a universal priming or sealing agent for a variety of building substrate. PM-800 can be used the following substrates : plaster, timber, brick / block work, existing tile, painted surfaces, mastic asphalt, and vinyl tiles.
ADVANTAGES
- Good consistency of the mixture.
- Quick and easy to work with.
- Excellent flexibility to reduce hair-crack.
- Good bonding strength.
- Reduce cost.
SPECIFICATIONS AND PROPERTIES
Type : Liquid
Colour : Milky White
Ingredients : Copolymer Acrylic Styrene
Density : 1.01 g/cc
Tensile Strength 23˚C: 2.5 N/mm² ( 50% humudity )
Elongation at break 23˚C 8
Coverage Area : 8 - 10 m²/kg/layer, on even surface
APPLICATION
- Clean the surfaces from dust, dirt, and other materials that may effect the bonding strength.
- Use a clean and leakproof pail for mixing.
- Gradually put liquid PM-800 into the water and mix thoroughly until an even consistency is achieved for around 2 minutes, allow to be settled for 10 minutes for additives to dissolve. Re-stir before using. The mixture will be stable for 3 hours.
- Re-stir the pasta regularly, but do not add more water or liquid PM-800.
- Machine mixing is highly recommended.
STORAGE
Always strore in dry place away from contact with moisture and water.
PACKAGING
- Multi layer paper bag containing 40 kg.
- Bonding Agent PM-800 storage times should not exceed 12 months.
