PM-405 – Heavy Duty Tile Adhesive
USAGE
PM-405 is two part flexible adhesive, designed to be used on dynamic, wooden or steel substrate.
ADVANTAGES
- Good consistency of the mixture.
- Quick and easy to work with.
- Excellent flexibility to reduce hair-crack.
- High bonding strength.
- Various substrate ; wooden, concrete, glass, and steel.
SPECIFICATIONS AND PROPERTIES
Type : Powder + Liquid
Colour : Dark Grey
Binder : Portland Cement
Aggregate : Silica Sand up to 0.6 mm maximum size
Additives : Water-soluble additive to improve workability, and tensile adhesion strength.
Dry Density : 1.7 kg/l
Wet Density : 1.9 kg/l
Liquid Demand : 13.2 - 13.5 l/40 kg
Open Time : 10 - 15 minutes, on even surface
Water retention : > 95 % ( BS 4551 : 1980 )
Adhesion Strength ( Pull off ) > 2.0 N/mm²after 28 days ( EN 1348 : 1999 )
Compressive Strength : > 15 N/mm² after 28 days
Flexural strength : > 7 N/mm² after 28 days
Thickness for application : 3 - 7 mm
Coverage Area : +/- 8 m²/40 kg/3 mm
APPLICATION
- Clean the surfaces from dust, dirt, and other materials that may effect the bonding strength.
- Use a clean and leakproof pail for mixing.
- Gradually put Powder PM-405 into a container containing liquid emulsion and mixing thoroughly until an even consistency is achieved for around 2 minutes, allow to be settled for 10 minutes for additives to dissolve. Re-stir before using. The mixture will be stable for 3 hours.Re-stir the pasta regularly, but do not add more liquid or PM-405 powder.Machine mixing is highly recommended.
STORAGE
Always strore in dry place away from contact with moisture and water.
PACKAGING
Powder 5 kg + 1,65 lt styrene acrylic emulsion.
Powder 25 kg + 8,25 lt styrene acrylic emulsion.
Heavy Duty Tile Adhesive PM-405 storage time should not exceed 12 months.
